|
Facilities
COMPUTERIZED NUMERICAL CONTROL (CNC) MACHINES
- 4 3-AXIS CNC SWISS-TYPE AUTOMATIC SCREW MACHINE: 5/8" dia. capacity. Attachments for: cross drilling & milling, overhead milling, slotting, eccentric axial drilling and tapping, programmable work support, and spindle indexing. One (1) machine is equipped with an automatic magazine bar feeder.
- 3 3-AXIS CNC SWISS-TYPE AUTOMATIC. SCREW MACHINE: 1-1/4" dia. cap. X 11.8" headstock stroke and with hydrodynamic bar feed, 1 degree spindle indexing, long turn steady rest, and attachments for; cross drill, cross tap, overhead milling, slotting, off-center face drill/mill.
- 1 5-AXIS CNC SWISS-TYPE AUTOMATIC. SCREW MACHINE: 13/16" dia. cap. X 8.0" headstock stroke and with hydrodynamic bar feed, C-axis, programmable subspindle, and attachments for; cross drill, cross tap, overhead milling, slotting, off-center face drill/mill.
- 1 7-AXIS CNC SWISS-TYPE AUTOMATIC. SCREW MACHINE: 13/16" dia. cap. X 8.0" headstock stroke and with hydrodynamic bar feed, C-axis, programmable subspindle, and attachments for; cross drill, cross tap, overhead milling, slotting, off-center face drill/mill.
- 1 4-AXIS CNC SWISS-TYPE AUTOMATIC SCREW MACHINE: having 7/16" diameter capacity and equipped with CNC programmable sub-spindle, 12,000 RPM main spindle and automatic magazine bar feeder.
- 2 3-AXIS, DUAL TURRET CNC TURNING CENTER: Equipped with two (2) independent tool turrets for high speed bar work to 1-1/4" diameter and chucking work to 5" diameter and lengths to 9.0" long.
- 2 2-AXIS CNC HORIZONTAL TURNING CENTER: 2-1/2" dia. bar capacity and 10" dia. X 18" long chucking capacity equipped with programmable tailstock and IGF ( Interactive Graphics Programming ).
- 2 CNC VERTICAL MACHINING CENTER: equipped with (18) tool automatic tool changer, 6000 RPM spindle, and having table travel of X - 23.6" : Y - 15.75" : Z - 18.1" and w/ programmable rotary indexer.
- 1 CNC VERTICAL MACHINING CENTER: equipped with DUAL PALLETS, (16) tool automatic dual arm tool changer, 12,000 RPM spindle, Fanuc 18M control and having table travel of X - 22.0" : Y - 16.1" : Z - 17.7".
- 1 2-AXIS CNC TURNING CENTER: Equipped with, programmable tailstock for both high speed bar work to 1-1/4" diameter and chucking work to 5" dia. X 9.0" long.
- 1 2-AXIS CNC TURNING CENTER: Equipped with programmable tailstock for both high speed bar work to 1-3/8" diameter and chucking work to 8" dia. X 13.5" long.
- 1 CNC SECOND OPERATION TURNING CENTER, HARDINGE CHUCKER RETROFITTED WITH Fagor 8025 CNC control : 1-1/16" dia. bar capacity and 4" dia. X 6" long chucking capacity
- 10 TOOL PRESESETTERS for the various CNC Swiss-Type machines above.
- 2 CAM OPERATED screw machines; with 5 slides and 5/8 and 1.0 spindle capacity; complete with a large variety of tooling, cams and accessories.
- 2 CAD-CAM CNC PROGRAMMING SYSTEM direct connected (DNC) with all above CNC equipment.
^ Back to top
INSPECTION
- 4 OPTICAL COMPARATORS, profile and surface illum. (1 is fully CNC controlled with OPTIC PROBE )
- 3 12" MASTER HEIGHT GAGE (Cadillac Style) WITH 6" RISER; ACCURACY +/-.000050"
- 4 MICROSCOPES with illumination.G
- MICROMETERS & CALIPERS, I.D. and O.D. of standard, digital, indicator and special configuration
- Digital calipers to 19; Verier calipers to 40
- PIN GAGES - 9 sets covering range from .011 to .832 and many sets of DELTRONIC gages
- MASTER and WORKING sets of gage blocks
- Large variety of thread ring and plug gages,
- SURFACE PLATES of various sizes - steel and granite
- 1 FEDERAL POCKET SURF PROFILOMETER
- 1 ROUGHOMETER PROFILOMETER
HAND SCREW MACHINES, CHUCKERS, AND LATHES
- 3 Hand screw machine: 1-1/16" capacity
- 1 13" geared head engine lathe
|
- 1 BAR POINTING MACHINE with roller bar supports
|
MANUAL MILLING MACHINES
- 2 VERTICAL MILLING MACHINES, with digital readouts and other misc. attachments
- 1 VERTICAL MILLING MACHINE, small bridge style
|
- 1 PRODUCTION HORIZONTAL production miller
- 4 PRODUCTION HORIZONTAL production miller, high speed
|
^ Back to top
DRILLS & THREADING MACHINES
- 11 DRILL PRESSES - various types and sizes
- 2 BURGMASTER - six position Turret Drills
- 1 DELTA production drilling/tapping machine
- 2 SNOW automatic production drilling/tapping machine
|
- 6 PROCUNIER lead screw tapping units, #000 to 1/2" capacity
- 8 Tapping heads of various sizes
- 1 LASSY Precision hand tapper
- 4 DESOUTTER modular automatic drilling/tapping units
|
ABRASIVE MACHINES
- 1 AGATHON precision carbide tool grinder with diamond wheels
- 1 SUNNEN HONING MACHINE: .060"-3.00" dia. capacity
- 1 COVEL surface grinder; 6" X 12"
- 1 AMERICAN wet cutting abrasive cut-off machine
- 6 PEDESTAL GRINDERS: 5" TO 10" diameter wheels
|
- 1 DAREX drill grinder, 1/16 to 3/4" capacity, left hand and right hand
- 1 BLACK DIAMOND drill grinder; 3/8 capacity
- 4 FINISHING MACHINES - both vibratory and barrel types
- 1 ABRASIVE BLAST CABINET-Dayton
|
SAWS
- 1 DAKE production cold saw
- 1 DOALL vertical band saw with blade welder
|
- 1 JOHNSON horizontal band saw
|
^ Back to top
MISCELLANEOUS
- 1 TORIN HORIZONTAL FOUR-SLIDE, multi-axis wire or strip forming / stamping machine.
- 4 ARBOR PRESSES: (1) 3 ton (2) 2 ton (1) 1/2 ton
- 1 INGERSOL RAND 15 HP air compressor with 10 hp motor; newly rebuilt, and with new motor
- 1 SAYLOR BEALL 10 HP air compressor
- 1 DEGREASING TANK
- 1 BARRETT CENTRIFUGAL OIL EXTRACTOR
- 1 CENTRIFUGAL OIL EXTRACTOR
- 1 YALE FORKLIFT, PROPANE, 4000 LB capacity (old)
- 1 ELECTRONIC DIGITAL COUNTING SCALE
- 3 MECHANICAL COUNTING SCALES
| |